4 BIBO 3D Printer Touch Laser if bought with laser engraver

techmanga June 27, 2021 0 Comments



What are the advantages of a dual extruder 3D printer?


The main benefits of a dual extruder 3D printer include: * Better for supports: one extruder can print your chosen material, for example ABS or PLA, while the second extruder prints water-soluble supports, such as with PVA filament. These supports dissolve easily in water and leave you with smoother prints without having to remove them by hand. * Multiple colors: dual filament 3D printers can print multiple colors of the same filament type, such as PLA filament, for a stunning multi-colored part. * Multiple parts simultaneously (IDEX): with IDEX 3D printers such as the BCN3D Sigma D25, these printers have two extruders that operately completely separately, and can print different parts simultaneously.

What is the best 3D printer with a dual extruder?


Therefore, we created our ranking of the best dual extruder 3D printerscurrently on the market. We ranked these printers based on their price-performance ratio, reliability, price quality, build volume, and more.We also divided these printers into three categories: cheap dual extruder 3Dprinters under $1,000, and prosumer and industrial dual extruder 3D printersabove $1,000.

1. Geeetech A20M / A10M — Best Budget Dual Extruder 3D Printers


These fascinating 3D printers bend the rules of what actually defines dualextruder 3D printing. Allow us to explain: they can be loaded up with twoseparate filaments, such as red and yellow PLA — but it will come out of onenozzle, mixing the two colors within the print. Some call this dual nozzle 3Dprinting.The results are stunning. Combine red, orange and yellow filaments and watchas the vase you print emerges looking like an exotic cocktail. The printersoffer four dual 3D printing modes: single color, dual color, gradient color,and mix color 3D printing. This offers a huge range of print designs for sucha low cost dual extruder 3D printer.As for specs, the A20M features a good 255 x 255 x 255 mm build volume, withthe A10M only slightly smaller. The A20M also boasts a number of stabilityincreases as it is better anchored down. Overall, it’s an accurate (up to0.1mm layer resolution), fun and inexpensive dual color 3D printer, combiningcolors and filaments together through one nozzle.You can see the effects of the single nozzle mixer with two different coloredfilaments here.

2. Monoprice Dual Extruder 3D Printer — Monoprice Maker Select V2


American 3D printer manufacturer Monoprice have created some of the best low-cost 3D printers of the last few years. Their current Monoprice dual extruder3D printer, the Maker Select V2, is a cartesian printer offering a minimumlayer thickness of 100 microns, and weighs just 20 pounds!The Maker Select is a versatile printer, and can print ABS, HIPS, PETG, PLA,PVA, and many other materials. It also offers a great build volume for theprice, at 200 x 200 x 180 mm. The only downside however is the printer’s speed— there are much faster 3D printers out there.

Bonus: Palette 2S / Multi Material Upgrades: Filament Splicers


If you’re looking to print multiple colours without a dual extruder, thinkalso about going with a Palette. Rather than 3D printing two different coloredfilaments from separate extruders, the Palette 2S and 2S Pro splices up tofour different colored filaments — or different materials — together duringprinting to create multi-colored parts.They work by putting your model through specially-designed software — CANVASfor the Palette — which you can then assign different colors to beforeprinting. When that specific area is due to be printed, the Palette’s softwaresplices that colored filament to print exactly area in your chosen material orcolor.This makes the Palette perfect for architectural models for building projects,multi-colored tabletop models of your favorite designs or D&D models, and forbusinesses creating multi-colored prototypes. The standard Palette 2S includesall these features, with the Palette 2S Pro also able to splice 20% faster,and with an extended 2-year warranty and replacement parts.The Palette is compatible with most printers, but Prusa printers instead havea similar Multi Material Upgrade kit, allowing you to print up to 5 differentfilaments simultaneously. Prusa printers are some of the best 3D printersunder $1,000, with this upgrade transforming your Prusa into a multi-color ormulti-material 3D printer.The Palette 2S (left), and Prusa Multi Material Upgrade (right).

4. BIBO 3D Printer (Touch Laser if bought with laser engraver)


Where do we start with the eccentric BIBO printer? Well, most importantly italso performs another function. It can be used as a laser engraver! Theengraver can permanently etch your favorite designs into wood as well as cutpaper or felt materials — and 3D print!You can buy the BIBO as a 3D printer kit or pre-assembled, as well as with orwithout the laser engraver. And just because it does perform another function,that doesn’t mean it can’t excel in both. In fact, it’s a very effective multiextruder 3D printer, sporting a minimum layer height of 0.05 mm and printsstably in its closed build chamber.It’s a great printer, it’s bonkers, and it’s ambitious. Even the productimages on Amazon show the character and personality behind the machine. Welove it.

6. BCN3D Sigma D25 — IDEX 3D printer


Spanish 3D printer manufacturer BCN3D have made a name for themselves forreliable dual extruder 3D printers with a twist. Their printers, includingtheir Sigma range and the Epsilon, all use BCN3D’s IDEX 3D printing technology(Independent Dual Extruder System) — a unique and key advantage.IDEX 3D printing allows each extruder to move completely independently, notrestricted to working on the same model at the same time as with other 3Dprinters. Two different parts can be created simultaneously, halving the timetaken to create multiple small parts. The Sigma D25 also features high qualityE3D hot ends for good quality printing with many different materials,including tougher filaments, and the filament run-out sensor informs you whenfilament is low.For those who need a 3D printer for rapid prototyping, the ability to printmultiple parts simultaneously to test is a huge advantage. The BCN3D Sigma D25uses 2.85mm filaments instead of the standard 1.75mm, so take note of this,but is compatible with any 2.85mm filament. You can use a variety of 3Dprinter nozzle sizes, ranging from 0.3mm to 1.0mm, and it also has a clear andeasy-to-navigate touchscreen interface.Interestingly, the Sigma D25 is also an open source 3D printer, with theprinter’s firmware, process, software and other files available on the BCN3DGitHub. It works seamlessly with Cura 3D slicer, and is easy to set up and usefrom the get-go. It’s a great, reliable and effective dual extruder 3D printeroverall. With 50-micron resolution, it’s a high quality and high resolution 3Dprinter for accurate rapid prototyping.

7. Ultimaker S3 — Very accurate dual extruder 3D printer


Ultimaker are another desktop 3D printing giant who create fused depositionmodeling printers that have won many awards. Featuring a dual extruder and upto an incredible 20-micron accuracy, the Ultimaker S3 is a fantastic optionfor small businesses, makers, and prosumers alike.For accurate multi material 3D prints, there is none better than the UltimakerS3. It’s heavily used to create accurate architectural models as prototypesfor building developments, to create accurate industrial and engineeringprototypes, and in many other industries. It won dozens of awards on release,and is still one of the best dual extruder 3D printers around.With a print volume of 230 x 190 x 200 mm, the Ultimaker S3 is capable ofmeeting most printing needs. It also has a built-in camera so you can remotelymonitor prints in progress.Connectable via WiFi, Ethernet or USB drive, the Ultimaker S3 is designed tobe simple to use. Though not cheap at $3,850, the Ultimaker 3 is accurate,fast, reliable, and simple to operate. This makes it overall one of the bestdual extruder 3D printers on the market today.

8. Raise3D Pro2 / Pro2 Plus


Also featuring on our overall best 3D printer ranking, the Raise3D Pro2 rangegreatly impresses with its reliability, size and range of filaments you canprint. Beyond standard PLA, ABS and PETG printing, the Pro2 and Pro2 Plus 3Dprint Nylon, Polycarbonate, carbon fiber filaments, ASA, and metal-filledfilaments, on either of its two extruders.The Raise3D Pro2 also boasts a fantastic build volume, at 305 x 305 x 300 mm,easily enough for everyday and industrial printing needs. The printer is alsovery accurate, with a 0.01mm minimum layer height, and has a 7-inchtouchscreen for easy printer operation. At just under $4,000, the Raise3D Pro2is overall a fantastic dual extruder printer for the price tag.

Best Dual Extruder 3D Printer: What to Consider?


Safety FeaturesWhen getting any type of 3D printer, you need to look out for safety features.Many models have special traits to ensure there’s no heat damage or any excessfilament when the job’s done. They do that through traits like moving thenozzle away from the object if you pause or finish a job or cooling the nozzlewhen the printer is not in use.Ease of Use3D printers, especially dual extruder options, are extremely useful devices.However, they also tend to come with a lot of different bells and whistlesthat can be hard to keep track of if you aren’t experienced with the machines.If you’re just getting started or don’t want too much hassle, get a modelthat’s simple to set up and easy to use.Additional FeaturesWhen getting a 3D printer, it’s quite easy to get caught up on the printingitself. However, just because a dual extruder device can crank out greatmodels doesn’t mean it’s worth buying. You need to go above and beyond. Alwayslook for special traits like touchscreen user interfaces and heated glassbeds. Tough metal construction goes a long way as well.

Best Dual Extruder 3D Printer: Our Picks


If you want a more affordable 3D printer that still provides you with premiumtraits on top of dual extruder capability, check out the QIDI Tech X-Pro. Thismodel has a build volume of 230 x 150 x 150. While that’s a bit small comparedto other machines, the ample features more than make up for it. This model canprint just about anything you need it to, and it’s also durable enough towithstand high temperatures thanks to the 6mm aviation-grade aluminum buildplatform.Another huge bonus here is how easy the machine is to operate. Everythingworks together seamlessly and the mute printing option is wonderful. There arealso many upgraded parts, ranging from the motor to the main board. If youhave any problems or if any issues arise, you can also contact the one-to-oneQIDI Tech service. The excellent helpers will get back to you on any questionwithin 24 hours.What We Like: * Dual nozzle * Incredibly easy to use * 4.3-inch touchscreen * Durable * High temperature resistance * Excellent customer service * Mute printing * Affordable price pointWhat We Don’t Like: * Have to manually level the bed>> Check Price on Amazon << Equipped with a full color touch screen and filament detection that pauses ifthe spool runs out during printing, the BIBO 3D is one of the more reliabledual extruder printers on the market. This model is the best choice for userswho like premium characteristics or high-end traits. Not only does this comewith WiFi control that allows you to fully control your prints from your phoneor computer, but it also allows you to print in two colors.This is also a popular dual extruder option because of the copy printing,which cuts your printing time in half, and how easy it is to operate. Thereare many premium printers that can take a while to get used to, but you’llfind no such issues with this device. You can also use dissolvable filamentfor support and will seamlessly disappear during the printing process to onlyleave behind the finished product.What We Like: * Full color touch screen * WiFi control * Filament detection * Continued printing after power cut * Dual extruder allows for two-color printing * Extremely versatile * Copy printingWhat We Don’t Like: * Could have better customer support>> Check Price on Amazon << The FlashForge Creator Pro is a great 3D printer for anyone who valuesdurability. This sturdy model can handle a wide range of different tasks withease thanks to the sturdy metal frame, stable shell, and aviation levelaluminum plate with a thickness of 6.3mm. That combination is then backed by afull manufacturer’s warranty to keep you protected should something go wrong.If the above protections aren’t enough to give you peace of mind, the CreatorPro also has excellent free email support to answer your questions at anytime. Beyond that, there is a heat-resistant metal platform and a heavy-dutyaxis rod to ensure all of the machine’s movements are accurate and precise.The enclosed chamber helps protect your prints and the LCD screen is both easyand fun to use. There’s a handy SD slot as well.What We Like: * Stable metal frame * Durable * Aviation level aluminum plate * LED light illuminated printing area * SD slot * LCD screen * Heavy-duty guide rod * Acrylic cover allows for better insulation * Full manufacturer’s warrantyWhat We Don’t Like: * Requires a good amount of adjustments>> Check Price on Amazon <<

Two-material 3D printing innovations


2016 in desktop 3D printing was all about two-material 3D printing with newmachines and solutions present at almost every industry event. We alsointroduced several improvements and innovations to our DUAL PRO toolhead anddedicated Voxelizer software.Two-material print of an architectural modelThese innovations include higher quality in selective two-material prints likearchitectural models with transparent parts or detailed medical models printedwith water soluble PVA support.Two-material print with and without the PVA supportThanks to the built-in material mixer, DUAL PRO toolhead can also blendcolors. We took this ability to the next level with Image Mapping. Using thisfeature you can place bitmaps on 3D objects and print them in multiple colors.Image Mapping with ZMorph 2.0 SXCheck out the video below in which Przemek Jaworski, Founder & CEO of ZMorph,speaks about the two-material 3D printing with ZMorph 2.0 SX.

Leave a Reply

Your email address will not be published. Required fields are marked *