Mechanical Engineering Graduates

techmanga June 27, 2021 0 Comments



Regular Freshman Admission


Freshman applicants who do not meet the requirements for Assured Admissionwill be considered for regular admission if they meet all of the followingcriteria: 1. Graduated from a regionally-accredited high school, a home-school program, or hold a GED certificate of completion, and 2. Attained at least a 2.0 high school grade point average on a 4.0 scale, and 3. Have class ranking in the top 50 percent of their high school graduating class, and 4. Scored 1000 or above (Critical Reading and Math combined) on the Scholastic Assessment Test (SAT) prior to March 2016, OR scored 1080 or above (Evidence Based Reading and Writing, and Math combined) on the Scholastic Assessment Test (SAT), OR scored a 21 composite score or above on the ACT Assessment, and 5. Meet one of the curriculum requirements below: 1. Completed or enrolled in the Foundation, Recommended or Distinguished Texas High School Curriculum*, or an International Baccalaureate Program, OR 2. If attending a private Texas high school or an out-of-state high school, completed or enrolled in a college-prep curriculum as outlined below: English (4 semester credit hours) Math (3 semester credit hours, including Algebra II) Science (3 semester credit hours) Social Studies (3 semester credit hours) Academic Electives (3 semester credit hours) 6. Students who are home-schooled or graduating from an unaccredited high school must meet the minimum required SAT or ACT score as specified for Regular Freshman Admission. 7. Applicants to TWU must complete at least the Texas Foundation or Recommended High School Program (RHSP) to be eligible for admission consideration to a Texas public institution. Applicants who are home-schooled, or are graduating from a high school that does not utilize the Texas Foundation or RHSP, or an out-of-state high school, must complete and submit the Uniform Admissions Policy form as documentation of their high school program before being evaluated for admission.*Changes to the Foundation, Recommended and/or Distinguished Curriculum adopted by the state will be followed by TWU.

Adult/Non-Traditional Student Admission


An applicant may apply under adult student status if all of the followingconditions are met. The applicant must: 1. Have a high school diploma or Certificate of High School Equivalency (C-HSE), and 2. Have graduated high school or completed C-HSE requirements at least five years prior to the start date of the term of enrollment. If the high school diploma or the C-HSE was obtained less than five years ago, the applicant should apply as a traditional first time freshman. 3. Have not previously attempted more than 12 or more transferable semester credit hours of college-level credit. This does not include: developmental, vocational or technical credit.Applicants will need to meet one of the following high school equivalencytest. * GED test-General Educational Development Test by GEDTSA passing score requires a minimum of 145 on each of the four exams. * HiSet exam – High School Equivalency Test by ETSA passing score requires a minimum of 8 on each of the five exams, a combinedscore of 45, and a minimum score of 2 on the Language Arts-Writing essay.Applicants must submit an application, application fee, and official highschool transcript or C-HSE. The SAT or ACT test score is not required ofeligible adult/non-traditional applicants. An approved TSI test is requiredprior to enrollment in coursework.If an applicant has completed C-HSE requirements, the completion date of theC-HSE serves as the applicant’s high school graduation date. If the C-HSE wasobtained at least five years ago, SAT or ACT test scores are not required.However, if the C-HSE was obtained less than five years ago, the applicantwill be reviewed under provisional freshman admission criteria, which requiresthe submission of an SAT or ACT test score.Undergraduate Program Overview

Freshman Admission


To gain admission into mechanical engineering, entering freshmen or transferstudents with less than 12 hours of transferable college work must meet theUniversity Freshman Admission Requirements. Students who are interested indeclaring mechanical engineering as their major, but do not meet the assuredadmission requirements, will enter with the major of pre−engineering. Notethat while not eligible for admission to mechanical engineering, thesestudents may be eligible for admission to other engineering programs at TexasTech.

Mechanical Engineering Curriculum


Mechanical engineering is the broadest of the engineering disciplines and itscurriculum provides a strong foundation in mathematics and the physicalsciences of chemistry and physics, followed by an in−depth education in fiveof the principal engineering sciences: thermal science, fluids engineering,mechanics and materials, dynamics and controls, and mechanical design. Theprogram in mechanical engineering provides students the ability to apply theirengineering, mathematics, and science knowledge to design mechanical systemsand to solve engineering problems. Students learn to design and conductexperiments, to communicate effectively, to function in teams, and to utilizemodern engineering tools. Students gain an understanding of their professionaland ethical responsibilities as engineers. Perhaps most important, studentsare prepared for the lifelong learning necessary to function effectively asthe practice of engineering evolves.

Enrollment in Mechanical Engineering Courses


Enrollment in ENGR 1315 – Introduction to Engineering is open to all studentsaccepted for admission to Texas Tech University. Enrollment in any mechanicalengineering course beyond ENGR 1315 requires official admission to theDepartment of Mechanical Engineering or another engineering program at TexasTech University. Students in the engineering undecided program are noteligible for enrollment in mechanical engineering courses beyond ENGR 1315.

Mechanical Engineering Graduates


Graduates with a degree in mechanical engineering will find employmentopportunities covering a wide spectrum, including the aerospace, automotive,petroleum production, and refining industries, petrochemicals, electricalpower, electronics, semiconductors, computers, manufacturing, and production,as well as research positions in industry and government laboratories.Problem−solving techniques learned in the mechanical engineering curriculumare also applied to continued educational pursuits or graduate study inengineering, as well as in areas such as law, medicine, businessadministration, and other professions.

Freshman Admission


To gain admission into mechanical engineering, entering freshmen or transferstudents with less than 12 hours of transferable college work must meet theUniversity Freshman Admission Requirements. Students who are interested indeclaring mechanical engineering as their major, but do not meet the assuredadmission requirements, will enter with the major of pre−engineering. Notethat while not eligible for admission to mechanical engineering, thesestudents may be eligible for admission to other engineering programs at TexasTech.

Mechanical Engineering Curriculum


Mechanical engineering is the broadest of the engineering disciplines and itscurriculum provides a strong foundation in mathematics and the physicalsciences of chemistry and physics, followed by an in−depth education in fiveof the principal engineering sciences: thermal science, fluids engineering,mechanics and materials, dynamics and controls, and mechanical design. Theprogram in mechanical engineering provides students the ability to apply theirengineering, mathematics, and science knowledge to design mechanical systemsand to solve engineering problems. Students learn to design and conductexperiments, to communicate effectively, to function in teams, and to utilizemodern engineering tools. Students gain an understanding of their professionaland ethical responsibilities as engineers. Perhaps most important, studentsare prepared for the lifelong learning necessary to function effectively asthe practice of engineering evolves.

Enrollment in Mechanical Engineering Courses


Enrollment in ENGR 1315 – Introduction to Engineering is open to all studentsaccepted for admission to Texas Tech University. Enrollment in any mechanicalengineering course beyond ENGR 1315 requires official admission to theDepartment of Mechanical Engineering or another engineering program at TexasTech University. Students in the engineering undecided program are noteligible for enrollment in mechanical engineering courses beyond ENGR 1315.

Mechanical Engineering Graduates


Graduates with a degree in mechanical engineering will find employmentopportunities covering a wide spectrum, including the aerospace, automotive,petroleum production, and refining industries, petrochemicals, electricalpower, electronics, semiconductors, computers, manufacturing, and production,as well as research positions in industry and government laboratories.Problem−solving techniques learned in the mechanical engineering curriculumare also applied to continued educational pursuits or graduate study inengineering, as well as in areas such as law, medicine, businessadministration, and other professions.

Other Job Roles for B.Tech CSE Graduates


Some of the other job roles for B.Tech CSE graduates are as follows -System Database Administration|Computer Programmer —|— Engineering Support Specialist|Data Warehouse Analyst Software Engineer|Research Analyst Computer Operator|Lecturer or Professor

Average Starting Salary for B.Tech Mechanical Engineering Graduates


For B.Tech Mechanical Engineering graduates, the average starting salary willbe around Rs. 2,00,000 per annum. However, graduates of IITs may expect moreas top companies visit the campus. Your salary will improve based on yourtalent, expertise and skills.

Leave a Reply

Your email address will not be published. Required fields are marked *