Software Problem Try Reinstalling the App

techmanga June 27, 2021 0 Comments



Turn It off and on Again


It might be a meme at this point, but “turning it off and on again” is thesolution to many of life’s tech problems. Since a lot of issues are caused bysoftware, turning your computer, smartphone, or other gadgets off and thenbooting them up again eliminates the problem by “starting over.”Operating systems have lots of processes happening in unison. When one or moreof these processes encounters a problem, it can cause a chain reaction andlead to the device not functioning as expected. Sometimes you can identify andrestart the particular process that’s causing the problem, but it’s often justeasier to restart the device and wipe the slate clean.Restarting is also a good test of whether your problem is related to softwareor hardware. If your computer is acting slowly and taking a while to completea task, restarting it should fix the problem—if it’s a software problem. Ifthe problem persists even after restarting, you might want to consider thathardware (like a faulty stick of RAM or a failing hard drive) is to blame.For most devices, if the device isn’t responding, you can force a shutdownsimply by holding the power button for long enough. On an iPhone, you’ll wantto hold the power button and volume up or down at the same time. For devicesthat never really “power off,” like smart speakers and modern smart TVs,unplug the power cord and wait from around 30 seconds to a few minutes beforepowering up again.RELATED: Why Does Rebooting a Computer Fix So Many Problems?

Check for the Latest Software Updates


A persistent problem isn’t always down to failing hardware. Sometimes faultysoftware can cause a problem that will keep resurfacing until it is patchedout. You can often clear up these issues by checking for updates.It’s generally a good idea to update your gadgets as soon as a software updatebecomes available (with the exception of major operating system upgrades thatmay cause more problems than they solve). For the most part, smallerincremental updates should be applied as soon as possible.This also applies to accessories that might not have a direct link to thewider internet. For example, Xbox Series X|S and PlayStation 5 controllers canboth be updated over the air, but must also be connected to your primaryconsole for this to happen.Many issues are identified by other users in forum posts or on social mediabefore they are patched. It’s often a good idea to search the web for theproblem you’re having to find out how prevalent it is and whether a fix isalready available or being worked on for it.

Reset to Factory Settings


Virtually everything, including smartphones and tablets, can be reset to itsfactory settings these days. Any smart device that’s giving you issues mightbenefit from a reset. That includes network equipment like routers (often viaa small, pin-sized hole), modern smart TVs, wearables like smartwatches andfitness trackers, and game consoles.Just remember that if you do go this route, you will likely lose any user dataor preferences you have saved. In the case of a smartphone, this could be yourentire photo library. Other devices will need you to reenter your Wi-Fiinformation so that they can reconnect to the internet.

Bluetooth Troubles? Pair It Again


Bluetooth can be flaky at times, with some devices forgetting that they arepaired and sitting in a state of limbo trying to forget. This problem isincredibly common, and the fix is quite easy: Pair it again.You’ll need to “forget” the connection from the main device you’re connectingto (like a smartphone, computer, or console). Next, slip the device thatyou’re trying to connect into pairing mode and pair it again. Search the webfor answers if you can’t remember how to trigger pairing mode again.Some devices will forget settings when you do this. For example, Apple’swireless AirPods will forget which functions you have assigned to each ear (bytapping), so make sure that you look over any additional settings once you’vepaired again.

Give Safe Mode a Shot


Safe mode is a method of booting your Windows PC, Mac, or Android smartphonewith the bare minimum of software required for the operating system to run.Many drivers, kernel extensions, and startup programs that might be causingproblems are ignored in the boot sequence. This provides you with anopportunity to make changes to your device in a stable environment.In the case of macOS, initiating safe mode also checks your system forintegrity and repairs any problems it finds along the way. Sometimes this isenough to make certain issues go away altogether—but more often, it providesyou with an opportunity to make changes that might fix the issue yourself.Learn how to fix your Windows PC with safe mode and which key combinationboots your Mac into safe mode.

Connections and Cable Woes? Swap or Replace


Oleksandr Lytvynenko/Shutterstock.comCables are still a point of failure in many situations. The most obviousexample is USB cables used to charge your smartphone. Charging cables get somuch usage and are constantly being yanked and bent, so it’s no wonder thatthey fail so often. Replacing a cable can solve your issue or help youdiagnose it further.If the problem doesn’t go away with a new cable, there might be a problem withthe device it’s plugged into (like the wall socket or computer’s USB port), orthe port on the device itself may be faulty. This can aid in diagnosing andultimately fixing the problem.But charging cables are just the tip of the iceberg. Network problems can becaused by faulty network cables, especially if they are constantly connectedand disconnected. HDMI cables can fail without warning, and many of themaren’t fit for purpose in the first place.On a side note, if you are replacing an HDMI cable, don’t fall for so-called“premium” cables that cost an arm and a leg.

Software Problem? Try Reinstalling the App


If your issue is software-related and you’ve already tried restarting with nosuccess, reinstalling the software in question might be a good idea. If it’s amobile or desktop application, this is a pretty straight-forward process.Check out our guides on uninstalling apps from Windows 10 and completelyremoving software from your Mac. We’ve also covered removing an app from aniPhone or iPad and uninstalling apps on an Android device, too.Just remember that you’ll need an original install medium to reinstall theapp. This might be a lengthy software download or even a DVD (if you’re stillinstalling software that way). If the problem isn’t too severe, you might wantto wait until you aren’t relying on the app in question (for example, afteryour workday) to take it out of action.

Buttons Stuck or Not Registering? Clean It Out


This is a tip mostly aimed at gamers but that applies to anyone who might havespilled a sticky drink on a gadget in the past. There are all sorts of tricksfor cleaning sticky controller buttons, and most of them involve usingisopropyl alcohol.If you’ve got a sticky button on a controller or a keyboard, you can probablyclean it yourself. Check iFixit for guides on how to open your particularhardware, then take your isopropyl alcohol and cotton buds and get to work.Tim BrookesIf you’re not crazy about opening up your device, applying isopropyl alcohol(90% or higher) and pressing the button repeatedly will often start to getthings moving again. Thin plastic (like a split drinking straw) can be used tohelp the alcohol penetrate the mechanism. You should always do this while thedevice is off, preferably with any batteries removed.If you don’t have much luck the first time, repeat the process until you do.It’s not as effective as opening up the gadget and cleaning it properly, butit still might work. Isopropyl alcohol should evaporate completely withoutleaving any residue. Just buy the highest percentage you can find for the bestresults.RELATED: How to Safely Clean Your Nasty Game Controllers* * *The vast majority of gadget troubles have simple solutions. Figuring out whyWindows is crashing or why your laptop is overheating is a learning process,so don’t be put off if you don’t find the solution right away.Got any other top tips you regularly use to diagnose tech troubles? Drop themin the comments section below.How to: Connect a Bluetooth headset to Yamaha MusicCast system

How can I stream music from a MusicCast device to my Bluetooth headphones


or speakers?Having recently purchased a pair of Sennheiser Momentum 2.0’s to keep theneighbours happy i thought it worthwhile documenting my experience trying topair them with my Yamaha RN402D stereo amp. This should of been easy, but itell you it wasn’t, and the user manual for the Yamaha basically sends you ona wild goose chase. Pairing the M2’s with my android phone was simple enough,enter pairing mode on the M2’s by holding down the power button for a coupleof seconds until you hear ‘Pairing Mode Activated’ through the cans, thenenable bluetooth on your phone and search for the Momentum Headphones, thenconnect. Easy.The problem with the Yamaha is there is no obvious way of doing this. Themanual tells you to enter pairing mode by holding the connect button on theremote of the amp. This doesn’t work for Bluetooth pairing, it’s designed forYamaha MusicCast devices only. If you want to connect third party bluetoothcans you need to use the MusicCast app on your phone. While the manual doestell you this, it doesn’t then tell you how to pair a new device. Iincorrectly assumed i could use the ‘Add device’ wizard, again this is onlydesigned for other MusicCast devices.Instead, the correct procedure, is to click the ‘Sound Setting icon’ on the‘Now Playing’ screen, then select ‘Bluetooth Transmission’. Once on thisscreen, enter pairing mode on your bluetooth headset and then search for newdevices. Your headphones should then appear for selection and pairing. Now whywould you hide it there, Yamaha.

How can I stream music from a MusicCast device to my Bluetooth headphones


or speakers?Having recently purchased a pair of Sennheiser Momentum 2.0’s to keep theneighbours happy i thought it worthwhile documenting my experience trying topair them with my Yamaha RN402D stereo amp. This should of been easy, but itell you it wasn’t, and the user manual for the Yamaha basically sends you ona wild goose chase. Pairing the M2’s with my android phone was simple enough,enter pairing mode on the M2’s by holding down the power button for a coupleof seconds until you hear ‘Pairing Mode Activated’ through the cans, thenenable bluetooth on your phone and search for the Momentum Headphones, thenconnect. Easy.The problem with the Yamaha is there is no obvious way of doing this. Themanual tells you to enter pairing mode by holding the connect button on theremote of the amp. This doesn’t work for Bluetooth pairing, it’s designed forYamaha MusicCast devices only. If you want to connect third party bluetoothcans you need to use the MusicCast app on your phone. While the manual doestell you this, it doesn’t then tell you how to pair a new device. Iincorrectly assumed i could use the ‘Add device’ wizard, again this is onlydesigned for other MusicCast devices.Instead, the correct procedure, is to click the ‘Sound Setting icon’ on the‘Now Playing’ screen, then select ‘Bluetooth Transmission’. Once on thisscreen, enter pairing mode on your bluetooth headset and then search for newdevices. Your headphones should then appear for selection and pairing. Now whywould you hide it there, Yamaha.

Method 1: Re-pair your bluetooth headphones with your PC


As we mentioned in the beginning, your bluetooth headphones work well withother devices. You may not know, but this is the reason for this issue. Why?Because……For some bluetooth headphones, they cannot be paired with more than onedevice. After you pair them with other devices, if you want to pair with yourPC, you need to put them back into pairing mode and re-pair them with your PC.So to fix “Windows can’t detect bluetooth headphones” issues, you can try tore-pair your bluetooth headphones with your PC. Here’s how to do it:1) If your bluetooth headphones are on, turn them off.2) Press and hold the power button for a long time until the indicator tellsyou’re entering pairing mode.Tip: The button used to enter pairing mode differs depending on the productyou use. If you’re not sure about it, check the instruction manual for yourbluetooth headphones.* * *

Method 2: Update bluetooth drivers and add the device again


The issue can be caused by outdated bluetooth drivers. To fix this issue, youcan try to update the bluetooth drivers, then add your bluetooth headphonesagain.You can update the bluetooth drivers manually via Device Manager. To do so:1) On your keyboard, press Win+R (the Windows logo key and the R key) at thesame time to invoke the Run box.2) Type “devmgmt.msc” into the Run box and click OK to open the Device Managerwindow.3) Find Bluetooth in the list and right-click on the bluetooth device, andthen select Update driver.4) Select Search automatically for drivers. Then Windows will update thedriver for you.Tip: If you can’t update the bluetooth driver manually in this way, you canuse Driver Booster to update the driver automatically. With Driver Booster,you can update drivers with just a few clicks.Once updating the bluetooth driver, add your bluetooth headphones again.1) On your keyboard, press Win+I (the Windows logo key and the I key) at thesame time to open the Settings window.2) Select Devices.3) In the left pane, select Bluetooth & other devices, then in the right pane,click on Add Bluetooth or other device.4) Click on Bluetooth to connect your bluetooth headphones with PC. Follow theadditional instructions if they appear, then select Done.* * *

Leave a Reply

Your email address will not be published. Required fields are marked *