Working as a Surgical Technologist in California

techmanga June 27, 2021 0 Comments



Surgical Technology Programs in Florida


Completing a surgical technology program and becoming nationally certifiedwill increase your chances of being hired as well as your earning potential.To take the NBSTSA exam to become a certified surgical technologist (CST), asurgical technology program accredited by the Commission on Accreditation ofAllied Health Education Programs (CAAHEP) or the Accrediting Bureau of HealthEducation Schools (ABHES) must be completed. In Florida, there are more than60 colleges that offer accredited programs. Here are a few to give you an ideaof what to expect:

National Certification for Surgical Technologists


The NBSTSA is the nationally accepted exam for becoming a CST. Most states donot require this certification, but many employers prefer or require it forpotential employees. Therefore, it is highly recommended to sit for this exam.You can take this exam after you have completed a program that has beenaccredited by either the CAAHEP or ABHES.It would also be a good idea to join the Association of Surgical Technologists(AST). Not only will you be able to connect with other surgical technologistsand keep up with the current training information, members of the AST pay onlya $190 fee to take the NBSTSA exam. Non-members must pay $290.To remain an active CST, you must earn 60 continued education credits everyfour years and renew your license every four years. A renewal fee will berequired. This fee is discounted for AST members as well. You can also opt toretake the NBSTSA exam every four years, but you will have to repay the examfee every time in addition to the renewal fee. Testing locations in Floridainclude: Jacksonville, Miami Gardens, Miami, Ocala, Orlando, Sarasota,Tallahassee, Tampa and West Palm Beach.

National Surgical Technologist Certification


The state of Kentucky allows for two certification options. NBSTSAcertification as a surgical technologist requires that you complete a trainingprogram accredited by the Commission on Accreditation of Allied HealthEducation Programs (CAAHEP) or the Accrediting Bureau of Health EducationSchools (ABHES). Completion of a program qualifies you to take thecertification exam. A passing score is required to achieve certification.

National Surgical Assistant Certification


To qualify for the exam for NSAA certification you must complete a recognizedsurgical assistant program. There is just one recognized program in Kentucky,which is the surgical first assistant program at Madisonville CommunityCollege in Madisonville. To take the exam you must also have work experienceand letters of recommendation from surgeons.

Tennessee Schools for Surgical Technology


Certification through the NBSTSA is not strictly required to work as asurgical technologist in Tennessee. You can be eligible to work in the fieldafter completing a program accredited by CAAHEP, with or without subsequentcertification. There are several schools in the state that offer accreditedprograms: * Tennessee College of Applied Technology, Knoxville. The surgical technology program at TCAT Knoxville is a full-time load of courses that should take just 12 months to complete. It confers diplomas and prepares graduates to pass the certification exam. Students will spend six months in a clinical setting. The cost of tuition and fees for the program is $3,753, and the cost of books and supplies is $1,721. * Concorde Career College, Memphis. Students in Memphis can complete the 12-month surgical technology program at Concorde. The coursework includes classroom learning and training in patient care, sterilization of equipment and surgical assistance, as well as hands-on experience in a clinical setting. * Nashville State Community College, Nashville. This accredited program offers students the chance to earn a certificate and to be prepared to earn national certification in surgical technology. In addition to classes on campus, students will complete three courses in an externship, working hands-on with patients and medical professionals.

National Certification for Surgical Technologists in Missouri


Although there are no state-legislated requirements to become a surgicaltechnologist in Missouri, it is still a great idea to become a CertifiedSurgical Technologist (CST). This is a certification that most employers lookfor, and other employers will require this certification. Wherever you plan towork as a surgical technologist, you will benefit from being a CST as your jobhunt will be easier, and you could receive higher compensation than those whodo not have this credential.The CST exam is offered by the National Board of Surgical Technology andSurgical Assisting (NBSTSA). Eligibility requirements include payment of a$290 exam fee, as well as proof that you’ve completed a surgical technologytraining program accredited by either the CAAHEP or the ABHES. Alternatively,you can show that you have successfully completed a military training programin surgical technology. It is important to note that every four years you willneed to recertify as a CST by either retaking the exam or showing you haveearned at least 60 credit hours of continued education in the field during thefour-year period between exams.

Georgia Schools for Surgical Technologists


Multiple Georgia colleges have CAAHEP-accredited surgical technology programsto prepare you for a successful career. Listed below are some post-secondaryeducation options to choose from: * Albany Technical College offers a diploma program in Surgical Technology which can be completed in less than one year. Students will complete a total of 120 surgical cases over the course of this program. The cost of tuition per semester is $2,648 for in-state students and $4,784 for out-of-state students. * Athens Technical College allows you to choose between a diploma program and an associate degree program. The associate degree will take about two years to complete, while the diploma program can be completed in one year or less. The cost of tuition is approximately $2,684 per semester for in-state students and $4,820 for out-of-state students. * Atlanta Technical College offers an associate degree in Surgical Technology, which takes five semesters to complete. The program will cost a total of about $8,255 and requires a full-time commitment from students. The school is located in the city of Atlanta.

National Certification for Surgical Technologists in Georgia


It is highly recommended that you take the initiative to become a CertifiedSurgical Technologist (CST). It will be easier to find employment with thisnationally-recognized certification, since it shows your level of competencyas a surgical technologist.The exam and certification are offered by the National Board of SurgicalTechnology and Surgical Assisting (NBSTSA). To be eligible to sit for thisexam, candidates must provide official documents showing completion of aNBSTSA-recognized surgical technology program, which can be found under boththe CAAHEP and ABHES lists of accredited schools. You can also providedocumentation showing completion of a military training program in surgicaltechnology. The exam fee is $290. You will need to either retake the examevery four years or provide proof of 60 completed credit hours of continuededucation during the four-year period between exams, to show your continuedcompetence within the field.

Surgical Technology Programs in California


Not only does earning a certificate or degree in surgical technology preparestudents to take the national certification exam, it also provides them withwork experience since many of the programs include surgical externships.California has over 70 colleges that offer CAAHEP- and ABHES-accreditedsurgical technology programs. These are just a few of the many choices: * MiraCosta College. MiraCosta College in Oceanside presents students with the opportunity to earn a Certificate of Achievement in surgical technology. This is a one-year certificate program that consists of a total of 39 credit hours. Human Anatomy, Basic Medical Terminology and Basic Pharmacology must be taken before a student can be accepted into the program. Upon graduation from this program, students can take the national exam on campus. * San Joaquin Valley College. The following San Joaquin Valley College campuses offer an Associate in Science degree in surgical technology: Bakersfield, Fresno, Rancho Cordova and Temecula. This program takes 15 months to complete and covers surgical case management, basic surgical procedures and advanced surgical procedures. Program graduates qualify to sit for the national certification exam. They also earn CPR certification upon completion of the program. * Skyline College. Located in San Bruno, Skyline College offers both a certificate program and Associate in Science degree in surgical technology. The certificate program can be completed in approximately a year and consists of 34 credit hours of program specific courses. An associate degree can be earned in two years. A minimum of 60 credit hours are required to graduate. These hours include the 34 credit hours in the certificate program. The remaining credit hours are general education classes.

Surgical Technologist Certification in California


Students who complete a surgical technology program that is either ABHES orCAAHEP accredited are eligible to sit for the National Board of SurgicalTechnology and Surgical Assisting (NBSTSA) exam. Once they pass the NBSTSA,they will hold the title of certified surgical technologist (CST). It is not astatewide requirement to become nationally certified, but it is encouraged.Most employers in California prefer to hire CSTs and some even require thattheir potential employees be nationally certified.If you are a member of the AST, you will need to pay $190 to take the NBSTSAexam. Non-AST members must pay $290. Certification should be renewed everyfour years to remain current. Renewal can be achieved through taking 60continued education hours during the four years between renewals, or byretaking and passing the NBSTSA. Continued education can be completed throughtaking more surgical technology education courses or going to seminars. Arenewal fee will apply. You will also have to pay to retake the exam if youchoose that option. You shouldn’t have trouble finding somewhere to take theexam in California. There are more than 20 locations in which the exam can betaken including Anaheim, Burbank, Fresno, Laguna Hills, Modesto, Palm Springs,Sacramento, San Francisco and Ventura.

Working as a Surgical Technologist in California


Since California is such a large state, it is no surprise that there are manyopportunities for employment for surgical technologists. Some of the citieswith the highest employment rates for surgical technologists in the state areLos Angeles, San Francisco, San Diego, Sacramento, San Jose, Irvine, Fresnoand Long Beach. They may find work in places such as hospitals, outpatientsurgery clinics, plastic surgery centers, birthing centers and oral surgeryclinics. Surgical techs in hospitals may choose to focus on a specialty orthey may be “floaters,” meaning they will assist in various areas of surgery.If you are interested in a career as a surgical technologist in California,now is the time to pursue it. The growth rate continues to increase, andtraining and certification do not take long to complete. In addition, this isa rewarding career both financially and personally, and there is plenty ofopportunity for advancement in this field.

South Carolina Programs for Surgical Technology


If you’re someone who looking to dive into this new, exciting and veryrewarding career, you will need to attend an accredited surgical technologyprogram in order to become certified through the NBSTSA and work as a surgicaltech in South Carolina. While there are many surgical technology programs youwill need to seek out a certification or a degree program that is accreditedby The Commission on Accreditation of Allied Health Education Programs(CAAHEP) or the Accrediting Bureau of Health Education Schools (ABHES).There are several schools in South Carolina that offer accredited surgicaltechnology programs including: * Miller-Motte Technical College, Charleston. The surgical technology program at Miller-Motte Technical College is an Associate’s of Applied Science degree in Surgical Technology, which can be completed in as little as 18 months. This hands-on training helps provide students with the necessary skills and knowledge they need to obtain their CST through the NBSTSA. This program is also what the school considers to be a CampusFlex Track program, which means students can take classes on campus in a traditional group setting and also complete some coursework online. * Midlands Technical College, Columbia. For students who would prefer to obtain their certification more quickly than 18 months, Midlands Technical College in Columbia, South Carolina, offers a surgical technology diploma program that can be completed in as little as 12 months. This diploma program is certified through CAAHEP, so once students complete this program they will be eligible to sit for the Certified Surgical Technologist Exam. The last eight graduating classes of Midlands Technical College’s Surgical Technology program have had a 100 percent passing rate on this exam. * Piedmont Technical College, Greenwood. This accredited diploma program at Piedmont Technical College provides a hands-on surgery lab and three semesters of clinical experience to ensure that students gain essential hands-on surgical skills. Upon completion of this year-long program students will be eligible to sit for the NBSTSA exam.

Associate of Applied Science in Surgical Technology


Located in Fort Wayne, IndianaApplyThe Associate of Applied Science in surgical technology program at TrineUniversity is designed to prepare students to succeed, lead and serve thecommunity and the Certified Surgical Technology profession. The program islocated in the growing Trine University Fort Wayne education center on theParkview Hospital Randallia campus in Fort Wayne, Indiana.Learn more about the courses.The surgical technology program will be the beginning of a lifelong journey inthe pursuit of knowledge, professional development and personal growth. Theprogram is committed to maintaining the highest moral, ethical and academicstandards.In the operating room, surgical technologists work closely with surgeons,anesthesiologists, registered nurses and other personnel to provide directpatient care. Prior to a procedure, surgical technologists prepare theoperating room by ensuring the proper equipment, instrumentation, supplies andsolutions are available and ready. During a procedure, surgical technologistsanticipate the needs of the surgeon by passing the appropriate instruments andsupplies, managing the sterile field, and caring for specimens. Other dutiesinclude holding retractors, cutting sutures as directed, and measuring andpassing medications and hemostatic agents.Surgical technologists are experts in sterile technique, combining knowledgeof human anatomy, surgical procedures, and medical tools and technologies toeffectively assist physicians as they perform invasive procedures.

Leave a Reply

Your email address will not be published. Required fields are marked *